Zinc Planter Care
These planters are frost resistant when drained properly.
We recommend that you fill the bottom of the pot up with bricks,
stone, gravel or something similar to optimise drainage. To
avoid corrosion on the inside, ensure the drainage hole does
not get blocked; this is best achieved by placing the pot
off the ground. Use good potting compost to ensure optimal
drainage. Planters should also be lined with PVC or bin liner
to prevent corrosion from occuring. Planters must be rinsed
on a regular basis to ensure there is no build of dirt.
In time, UV and weather influences will change the colour
and finish of the product in a natural way. To reduce the
speed of this process you may treat the surface with linseed
oil. If a white sheen appears when the planter is first placed
outside linseed oil can be used to clean the surface. Please
use a soft cloth to clean the planter. In time, steel products
are subject to corrosion.
If used indoors, the product must be sealed or placed in
a saucer. To avoid possible problems with condensation on
delicate floors the product must be raised above the floor
so air can circulate, or must be placed on insulation material,
for example polystyrene.
Zinc planters are suited to the garden consumer market and
not intended for commercial use.
Gel Burner Care
Placement of the gel burner
-The burner is suitable for Garden, Patio, Conservatory and
Large Living Room.
- Ensure sufficient ventilation is in place without creating
a draft
- After a While the gel burner may create sight staining like
candles
- Make sure the gel burner is placed on a non inflammable,
heat resistant and stable surface
- Ensure that there are no inflammable objects within 2 meters
distance from the gel burner.
User instructions
- Always use the gel burner with the steel gel container
supplied
Filling the Steel Gel Container
- While the steel gel container is positioned outside the
gel burner holder, carefully fill the gel container to up
75% of it’s capacity.
- Remove any burning gel drops spilled onto the gel burner
& container before igniting the gel burner
- Never take out or refuel a hot or warm gel burner
Replacement of the steel gel container
- The steel gel container supplied is fire proof, but must
be replaced if there are any signs of cracks or corrosion.
Usage
- Ignite the gel burner using a long match
- Do not put anything into the flame as this will cause soot,
smoke and fire
- Let the contents of each Gel Container run out and never
leave a burning flame unattended
- Always keep pets and children away from a naked flame
- When using the gel burner outside, please note that a unpredictable
flame can develop
- In case you wish to extinguish the flame before the Gel
Container runs out of gel, cover the flame with the lid, and
ensure the flame is out. Remove the gel container when it
has cooled down and remove the remaining gel
- Do not re-use remaining gel
- Clean the gel container after use by soaking it for about
300 minutes in water and washing up liquid. If required, brush
out the residue and rinse the water. The container is ready
for re-use.
Characteristics
- Always follow the instructions shown on the packaging of
the gel.
- The is Gel is flammable liquid, always take care in storage
and keep out reach from children
- In care of swallowing the Gel, immediately contact a doctor
and show the label or packaging of the gel
- The packaging of the gel should be kept away from ignitable
sources
- Do not smoke when lighting the Gel Burner
- The gel for gel burner is best used at room temperature
when used. In temperatures below 10 degrees Celsius the gel
will not ignite easily and it will take more time to for an
attractive flame to develop.
Fibre Terrazzo Care Information
UV and weather influence the surface of Terrazzo over time,
the surface may dry out and fade the colour. In order to retain
the colour apply linseed oil evenly to the furniture. With
a soft cloth, rub the oil in a circular motion which will
embed the oil in the material and will further protect the
furniture.
Avoid the use of aggressive detergents and contact with substances
containing acids.
Sharp objects will scratch the surface of Terrazzo.
Recommended for light commercial use.
Wicker Care Information
Maintenance is simple. Just hose off and wipe clean with
mild dish soap and water solution. Cushion Care. Vacuum regularly
to remove dust. Fluff cushions periodically to maintain original
fullness. Showerproof cushions will need to be cleaned with
water and a mild soap. Rinse and dry. 1 Year Warranty.
Recommended for light commercial use.
|
